I just talked to Lloyd at Paintcare aerospace who reminded me of the procedure to use for the equipment I bought from them over a year ago. Primarily I bought products which provided the best protection with the least hazardous risk.
STEP 1: WASH
Use the Turco WO1 to wash the parts. Mix 1 part Turco WO1 with 3 to 6 parts water at room temp. Apply with brush or cloth saturated with solution. Gentle scrubbing speeds soil removal. Rinse with cold or warm water.
STEP 2: CONVERSION COATING
Apply PreKote as per manufacturers specification.
STEP 3: PRIME
Interior: Apply BMS 10-11 Primer
Exterior: Apply BMS 10-79 Primer
Top coat within 72 hours
STEP4: TOP COAT
Wipe surface with tak rag to remove any super fine dust particles.
Apply top coat.
No comments:
Post a Comment